Reduced drying time (vehicle can
be driven away after approx.
3 hours in the case of air drying).
Suitable for painting over.
1-l container can be painted over
after 6 hours, 500 ml (spray can)
can be painted over after 3 hours
with all standard painting systems.
(Follow the manufacturer’s
Excellent adhesion performance.
High abrasion resistance.
Active stone chip protection.
Prevents noises and vibrations
Complies with the VOC maximum
content specified in the VOC
* volatile organic compounds
t t t tt
MWF - 05/08 - 11040 - ©
Synthetic rubber and plastic-based coating
compound containing solvents and suitable
Areas of application:
For touching up and for protecting the underbody, wheel wells, sills, spoiler,
front and rear aprons, engine compartment etc.
Caution! – 500 ml container not suitable for large-area applications.
Shake can well before using. The application surface must be clean, dry and
free of rust and grease. Prime bare metal parts. From a distance of approx.
20–30 cm, spray on with 2-3 back-and-forth motions. Allow the product to dry
between layers in case of thicker layers. Before the top-coat laquer application,
it is recommended to spray on a thin coat to provide for better adhesion.
Check the application unit’s function before use. After use, turn the can upside
down and spray until the valve is empty. Do not spray onto joints, engines,
transmissions and brake systems.
Contents in ml
0893 075 1
This information is only a recommendation based on our experience.
Preliminary testing required. For further information, see the technical information leaflet.
Art. No. 0891110 640
Art. No. 0891106 3
Art. No. 0899 700 ...